Moderator: jrhees
jrhees wrote:Here, give this a try (copy one of your working commands in Girder and replace the Code1 with this:
Karate Chop (D6):
R08008104808221808221212180822121218082218082212121
Let me know if this works.
-Jon
anonymous wrote:jrhees wrote:Here, give this a try (copy one of your working commands in Girder and replace the Code1 with this:
Karate Chop (D6):
R08008104808221808221212180822121218082218082212121
Let me know if this works.
-Jon
Works Great!!!
(At least in VB6, so I assume it would work the same in Girder)
Thanks Jon. It looks like you've figured it out. I'll look forward to hearing what the conversion is.
jrhees wrote:Here's the conversion process (its very manual, but will work):
lafugitt wrote:I just hacked together an Excel spreadsheet with a table of the codes using HEX2BIN() and MID() to do the conversion. I want to test all the codes from 80 through FF with my Robosapien tonight, and put the corresponding movement names into the table, then I'll post a link to it here.
lafugitt wrote:I just hacked together an Excel spreadsheet with a table of the codes using HEX2BIN() and MID() to do the conversion. I want to test all the codes from 80 through FF with my Robosapien tonight, and put the corresponding movement names into the table, then I'll post a link to it here.
Users browsing this forum: No registered users and 1 guest