Any idea why I can get the UIR codes, but not the learn data

Interested in integrating USB-UIRT support into an application? Look here!

Moderator: jrhees

Any idea why I can get the UIR codes, but not the learn data

Postby BeyondVR » Mon Feb 01, 2010 3:24 am

I'm using LrnHelper. It can easily recieve the UIR, but will not learn a code in any format. The signal indicator always indicates there is no signal. The light on the transceiver will blink if set to blink when receiving, but only blinks (receives) when NOT attempting to Learn.
Posts: 1
Joined: Mon Feb 01, 2010 3:10 am

Postby Xtremedimension » Tue Apr 20, 2010 2:47 pm

I have the same problem, any idea?
Posts: 1
Joined: Tue Apr 20, 2010 2:26 pm

Postby canoewhiteh2o » Wed Apr 21, 2010 10:54 am

The instructions in lrnhelper indicate to hold the remote about 6" from the USB-UIRT. I find that this distance is too far and does not work. Hold the remote somewhere between 1-2 inches from the usb-uirt and point the remote just to the left (1/4") of the red indicator led.
Posts: 66
Joined: Thu Dec 28, 2006 1:52 pm

Return to Developers

Who is online

Users browsing this forum: No registered users and 1 guest