Page 1 of 1
Any idea why I can get the UIR codes, but not the learn data
Posted:
Mon Feb 01, 2010 3:24 amby BeyondVR
I'm using LrnHelper. It can easily recieve the UIR, but will not learn a code in any format. The signal indicator always indicates there is no signal. The light on the transceiver will blink if set to blink when receiving, but only blinks (receives) when NOT attempting to Learn.
Posted:
Tue Apr 20, 2010 2:47 pmby Xtremedimension
I have the same problem, any idea?
Posted:
Wed Apr 21, 2010 10:54 amby canoewhiteh2o
The instructions in lrnhelper indicate to hold the remote about 6" from the USB-UIRT. I find that this distance is too far and does not work. Hold the remote somewhere between 1-2 inches from the usb-uirt and point the remote just to the left (1/4") of the red indicator led.