Issue with Bell Expressvu 3100 code learning

Having problems? Use this forum to find help!

Moderator: jrhees

Issue with Bell Expressvu 3100 code learning

Postby brujack » Mon Jan 11, 2010 2:07 am

I just purchased a new usb uirt to control a pair of bell expressvu 3100's. I am having some issues with this setup. I am using Snapstream 4.9.2. To begin with I had just one setup and used the Echostar 3000 with the expressvu using remote channel 1. This worked fine.

I added the second expressvu box to the setup and changed its remote channel to 2. I trained the IR codes and after a few times training I am getting it to work. Now expressvu box no 1 does not work anymore. For no 1 I learned the codes as the Echostar IR codes were no longer working. The codes appear to learn fine. Box no 2 continues to work on channel 2. I tried changing box 1 to channel 3 and learned the IR codes. Still no success.

Anyone have any clues as to what is happening?

Bruce
brujack
 
Posts: 2
Joined: Mon Jan 11, 2010 1:59 am

Postby brujack » Thu Jan 21, 2010 5:10 pm

10 days later and still no one has any possible solution. I really need this to work.

Bruce
brujack
 
Posts: 2
Joined: Mon Jan 11, 2010 1:59 am


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 31 guests

cron