remote clicks are sent twice to application

Having problems? Use this forum to find help!

Moderator: jrhees

remote clicks are sent twice to application

Postby dbbd » Mon Feb 18, 2008 1:59 pm

Just installed my new USB-UIRT. I'm using HIP & GB-PVR.
My remote is a universal Philips SRU9600. I set it up to be microsoft remote compatible (I guess this means MCE remote).

After programming HIP, each time I hit a key on the remote, I get 2 blinks on the USB-UIRT, 2 audio signals (when on), and 2 events sent to the application e.g. one click on up, causes 2 up on the sisplay.

I tried to turn on the toggle bit, and also played with the delay, withou any luck.

Any ideas what to try next?

Thanks,
Dan
dbbd
 
Posts: 2
Joined: Mon Feb 18, 2008 1:51 pm

Postby mlaviolette » Wed Feb 20, 2008 4:11 am

Have you tried to change the number of times HIP sends out the IR signal? The default is 2. I had to bump mine up to 4 to control my DishNetwork DP311 receiver, but you may have to drop it to 1. You can find the value in HIP from File->Preferences->IR Output. Hope this fixes it.

Mike
mlaviolette
 
Posts: 3
Joined: Mon Feb 18, 2008 2:48 am

Postby dbbd » Wed Feb 20, 2008 6:15 am

I'm not using an IR blaster - i.e. I'm not generating IR events to some other device.
I'm using the remote to send commands to the computer/application - and these commands are received twice.
dbbd
 
Posts: 2
Joined: Mon Feb 18, 2008 1:51 pm


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 34 guests