Hi All.
It was working great until yesterday morning. The indicator light used to come on on a remote press, and occasionally just randomly. Now it is just on all the time. Using the usbuirt in an opensuse 10.1 mythtv setup. I had done a bunch of updates the day before, but it was working after the reboot.
dmesg gives:
usb 1-5: new full speed USB device using ohci_hcd and address 5
usb 1-5: new device found, idVendor=0403, idProduct=f850
usb 1-5: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB-UIRT
usb 1-5: Manufacturer: FTDI
usb 1-5: configuration #1 chosen from 1 choice
ftdi_sio 1-5:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 1-5: FTDI USB Serial Device converter now attached to ttyUSB0
lircd gives:Feb 9 08:05:41 reggie lircd: accepted new client on /dev/lircd
Feb 9 08:05:42 reggie lircd: uirt2_raw: did not receive results
Feb 9 08:05:44 reggie lircd: uirt2_raw: did not receive results
Feb 9 08:05:44 reggie lircd: uirt2_raw: No UIRT2 device found at /dev/ttyUSB0
Feb 9 08:05:44 reggie lircd: caught signal.
Plugged directly into the computer, no hub used.
Any help would be great.
Thanks
Hans