Hacking Daikin protocol

Having problems? Use this forum to find help!

Moderator: jrhees

Hacking Daikin protocol

Postby domu » Tue Sep 25, 2007 5:04 am

Hi everyone,

browsing through forums here I found couple of useful
pieces of information about Daikin IR remotes, but not
much conclusive data. Since I am trying to incorporate
Daikin control in my setup - I have attempted to explore
this issue a bit further.

Below is the outcome of testing based on AirCon Daikin
FT18GV1LS (but looking at sample output from others
it probably apply to other models too).

As mentioned on this forum every burst of data contains
complete set of settings for the AC unit.

Burst size: 432 bytes

It looks like every burst is organized in 4 byte 'packets',
first three packets are probably some kind of header.
Next follows 104 packets of data. Last, there is one EOT
kind of packet.

Data packets are always 00-0c-00-xx sequence, where
xx can be either 0x19 or 0x3d. It seems that 0x19 stands
for '0' and 0x3d stands for '1' respectively. Which gives:

1 = 00000000-00001100-00000000-00111101 = 00 0C 00 3D
0 = 00000000-00001100-00000000-00011001 = 00 0C 00 19

Hence every packet corresponds to one bit of data.

Following is commented image of a single burst. I have
already identified some sections, for those that are still
not - everybody is welcome to fill it in.

Code: Select all

pkt   byte   [1]   [2]   [3]   [4]
------------------------------------------ HEADER
001   000   00   00   00   7B
002   004   00   00   00   6A
003   008   00   A9   00   49
------------------------------------------ ?
004   012   00   0C   00   3D
005   016   00   0C   00   19
006   020   00   0C   00   19
007   024   00   0C   00   19
008   028   00   0C   00   3D
009   032   00   0C   00   19
010   036   00   0C   00   19
011   040   00   0C   00   19
012   044   00   0C   00   19
013   048   00   0C   00   3D
014   052   00   0C   00   19
015   056   00   0C   00   3D
016   060   00   0C   00   3D
017   064   00   0C   00   19
018   068   00   0C   00   3D
019   072   00   0C   00   3D
020   076   00   0C   00   3D
021   080   00   0C   00   3D
022   084   00   0C   00   3D
023   088   00   0C   00   19
024   092   00   0C   00   19
025   096   00   0C   00   3D
026   100   00   0C   00   19
027   104   00   0C   00   19
028   108   00   0C   00   19
029   112   00   0C   00   19
030   116   00   0C   00   19
031   120   00   0C   00   19
032   124   00   0C   00   19
033   128   00   0C   00   19
034   132   00   0C   00   19
035   136   00   0C   00   19
036   140   00   0C   00   3D
037   144   00   0C   00   3D
038   148   00   0C   00   19
039   152   00   0C   00   19
040   156   00   0C   00   3D
041   160   00   0C   00   19
042   164   00   0C   00   3D
043   168   00   0C   00   3D
------------------------------------------ POWER
044   172   00   0C   00   p1 1 = ON
------------------------------------------ ?
045   176   00   0C   00   19
------------------------------------------ ON-TIMER (1)
046   180   00   0C   00   z1
------------------------------------------ OFF-TIMER (1)
047   184   00   0C   00   y1
------------------------------------------ MODE (1)
048   188   00   0C   00   m1 1 = FREEZE
049   192   00   0C   00   3D
050   196   00   0C   00   m2 1 = FAN
051   200   00   0C   00   19
------------------------------------------ SWING (1)
052   204   00   0C   00   s1
------------------------------------------ ?
053   208   00   0C   00   19
054   212   00   0C   00   19
------------------------------------------ POWERFUL
055   216   00   0C   00   L1
------------------------------------------ SWING (2)
056   220   00   0C   00   s2
057   224   00   0C   00   s3
058   228   00   0C   00   s4
059   232   00   0C   00   s5
------------------------------------------ ON-TIMER (2)
060   236   00   0C   00   z2
061   240   00   0C   00   19
062   244   00   0C   00   19
063   248   00   0C   00   z3
064   252   00   0C   00   19
065   256   00   0C   00   19
066   260   00   0C   00   19
067   264   00   0C   00   z4
------------------------------------------ OFF-TIMER (2)
068   268   00   0C   00   y2
069   272   00   0C   00   y3
070   276   00   0C   00   19
071   280   00   0C   00   y4
072   284   00   0C   00   19
073   288   00   0C   00   19
074   292   00   0C   00   19
075   296   00   0C   00   y5
------------------------------------------ ?
076   300   00   0C   00   19
temperature 1 ---------------------------- TEMP
077   304   00   0C   00   t1 (dh)
078   308   00   0C   00   t2 (dh)
079   312   00   0C   00   t3 (dh)
080   316   00   0C   00   t4 (dh)
081   320   00   0C   00   t5
082   324   00   0C   00   19 ?
------------------------------------------
083   328   00   0C   00   m3 (dh) 1 = DEHUM MODE (2)
------------------------------------------ FAN
084   332   00   0C   00   n1 (dh)
085   336   00   0C   00   n2
086   340   00   0C   00   n3
087   344   00   0C   00   n4 (dh)
------------------------------------------ ?
088   348   00   0C   00   19
089   352   00   0C   00   19
090   356   00   0C   00   19
091   360   00   0C   00   19
092   364   00   0C   00   19
093   368   00   0C   00   19
094   372   00   0C   00   19
095   376   00   0C   00   3D
096   380   00   0C   00   19
097   384   00   0C   00   19
098   388   00   0C   00   19
099   392   00   0C   00   19
------------------------------------------ CHECKSUM (?)
100   396   00   0C   00   x1
101   400   00   0C   00   x2
102   404   00   0C   00   x3
103   408   00   0C   00   x4
104   412   00   0C   00   x5
105   416   00   0C   00   x6
106   420   00   0C   00   x7
107   424   00   0C   00   x8
------------------------------------------ EOT
108   428   00   0D   03   DF
------------------------------------------



Notes:

1. 5 'bits' in temperature section contain temperature data
as a (binary value + 10), i.e.

77 = 1
78 = 1
79 = 1
80 = 1
81 = 0

01111 = 15

15 + 10 = 25 deg C

2. (dh) denotes 'bits' that were affected by Dehumidifier
function, while it was tested (since it was just single setting
test - most likely other bits in relevant sections may be
affected too).

3. Section 2 of On-Timer and Off-Timer probably contains
clock settings, but I have not test it.

4. Cancel button for timers sends just complete set of
settings sans timer data.

Please note, all data above are based on USB-UIRT input,
since I did not manage to get myself to check it on the
scope, hence raw data may differ. Also USB-UIRT reported
frequency in vincinity of 33.5 kHz, which probably is not
much a standard one.


HTH, sorry for a long post.
domu
 
Posts: 2
Joined: Sun Sep 23, 2007 12:29 pm

Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 31 guests

cron