USB-UIRT Forum

Hello,

You will find herafter an exarct from a mail , I sent to usb support last may, Thanks for the update :

_________________________________________________________

I use your device that i find very good with EventGhost that I find very good too.

I have an issue when I send this sequence to USB-UIRT :


USB_UIRT.TransmitIR(u'0000 006E 0022 0002 0155 00AA 0016 003F 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0040 0015 0016 0016 0040 0015 0040 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 003F 0016 0040 0015 0040 0016 0015 0015 0015 0016 0015 0016 0015 0015 0040 0016 0015 0015 0015 0016 0015 0016 003F 0016 0040 0015 0040 0016 003F 0016 068D 0155 0055 0015 0E31', 32767, 0)

This is infinite loop

When I want to stop , I send an Empty IR signal but it takes 4 seconds to proceed (USB-UIRT still flash for 4 seconds)

The forum moderator advice me to escalate the issue to USB-UIRT.

He also mentioned this sequence :

The Pronto code Jon Rhees needs to try it out is:
Code:
0000 006E 0022 0002 0155 00AA 0016 003F 0016 0015 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0040 0015 0016 0016 0040 0015 0040 0016 0015 0015 0015 0016 0015 0016 0015 0015 0015 0016 0015 0016 003F 0016 0040 0015 0040 0016 0015 0015 0015 0016 0015 0016 0015 0015 0040 0016 0015 0015 0015 0016 0015 0016 003F 0016 0040 0015 0040 0016 003F 0016 068D 0155 0055 0015 0E31

With the same problem,


This is the link to see the tread: http://www.eventghost.org/forum/viewtop ... =2559#2559

Thanks for your feed back and help

Antoine Seydoux
_________________________________________________________

Is there any way to sort out this issue ?