Double commands received from Hauppauge Silver Remote

Having problems? Use this forum to find help!

Moderator: jrhees

Double commands received from Hauppauge Silver Remote

Postby dougrt » Tue May 29, 2007 2:09 am

I recently purchased a USB-UIRT and I was going to use that in place of the IR sensor that came with my PVR-250, to control BeyondTV (among other things..), I am currently still using the Hauppauge Sliver Remote to control the HTPC.
It seems that every command coming from the Hauppauge remote is being received twice! This is very annoying when trying to select a show on the screen and it is always getting skipped over! :(
I did not have this problem when I was using the IR sensor with the PVR-250.
I had tried both girder 3.3, and girder 4.0 with the same results. The plugin version I'm using is 2.6.9.

Also, I think that the USB-UIRT hardware is processing the command twice, since the red light in the front of the device flashes twice for every button press, instead of once (even when girder is not running at all).

Any help would be much appreciated,
Thanks!
dougrt
 
Posts: 1
Joined: Tue May 29, 2007 1:44 am

Postby Tieske » Wed Oct 03, 2007 3:25 pm

Ran into this one as well using Girder 4.0. Try setting the "Anti Repeat [ms]" in the Event settings dialog. Setting the delay there fixed my issue.
Tieske
 
Posts: 7
Joined: Wed Oct 03, 2007 3:01 pm


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 28 guests

cron