USB-UIRT Forum

Plug-n-Play IR Solution
http://usbuirt.com/phpBB3/

Volume control on Philips receiver?

http://usbuirt.com/phpBB3/viewtopic.php?f=2&t=28

Page 1 of 1

Volume control on Philips receiver?

PostPosted: Fri Mar 07, 2003 2:57 am
by drogers
I've got my USB UIRT working great for all of my TiVo functions, but can only get some of the fuctions for my Philips receiver working. I've captured the commands for Volume Up and Volume Down (both standard and RAW), but the uirt is unable to actually change the volume. Any ideas?

add'l info -

PostPosted: Fri Mar 07, 2003 3:01 am
by Guest
Here's what got captured for Volume Up -

R0702261E261E261E481E261E261E261E2640481E261E261E26

I should also mention that I didn't capture any of the TiVo codes - After all the trouble I had with the receiver, I gave up and imported them from a website listing IR codes for Pronto owners. Unfortunately I can't find a similar list for my receiver.

Thanks!

Re: add'l info -

PostPosted: Fri Mar 07, 2003 5:07 pm
by jrhees
Anonymous wrote:Here's what got captured for Volume Up -

R0702261E261E261E481E261E261E261E2640481E261E261E26

I should also mention that I didn't capture any of the TiVo codes - After all the trouble I had with the receiver, I gave up and imported them from a website listing IR codes for Pronto owners. Unfortunately I can't find a similar list for my receiver.

Thanks!


drogers,

First things to try are to try different frequencies (try 36, 38, and 40KHz) and also (first) set the repeat count up high to something like 10 or 15. You can always back the repeat count down later.

What model philips receiver are you using?

-Jon

P.S. You can also send me an 'IR debug' of your volume button. That might help.

PostPosted: Fri Mar 07, 2003 11:13 pm
by drogers
It's an FR975. Here's the IR Debug of VolDn

Code: Select all
A9 10 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0F 13 0E 25 0F 13 0F 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 14 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0F 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0F 13 0E 13 1F 13 FF
06 D2 13 0E 13 0F 13 0E 25 0F 13 0F 13 0E 13 0F 13 20 25 0F 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0F 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0F 13 0E 13 1F 25 0E 13 0E 13 20 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0E 13 0F 13 1F 25 0E 13 0E 13 1F 13 FF
06 D2 13 0E 13 0E 13 0E 25 0E 13 0E 13 0F 13 0E 13 1F 25 0E 13 0E 13 1F 13 FF

PostPosted: Fri Mar 07, 2003 11:21 pm
by Guest
And the IRDebug for VolDN

Code: Select all
FA 80 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0F 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0F 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0F 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF
06 E2 13 0E 25 1F 25 0E 13 0E 13 0E 13 0E 13 1F 25 0E 13 0E 13 0E 13 FF

PostPosted: Fri Mar 07, 2003 11:23 pm
by drogers
Whoops - second one was VolUP

Thanks for your help!

PostPosted: Sat Mar 08, 2003 8:49 pm
by jrhees
drogers wrote:Whoops - second one was VolUP

Thanks for your help!


drogers,

Did you try a large repeat value?

-Jon

PostPosted: Fri Mar 14, 2003 1:50 am
by Guest
Yes, I've tried everything from 1-20, every frequency range available, and capturing raw or not. Any ideas?

PostPosted: Fri Mar 14, 2003 3:38 pm
by jrhees
drogers,

Do any of the other functions on your Receiver work (other than volume?)

I'll try to duplicate your remote with my All-for-One. If you happen to know the code for that remote, let me know.

-Jon

PostPosted: Mon Mar 17, 2003 7:03 pm
by Guest
jrhees wrote:drogers,

Do any of the other functions on your Receiver work (other than volume?)

I'll try to duplicate your remote with my All-for-One. If you happen to know the code for that remote, let me know.

-Jon


Yup, other things I program (mostly power/mode switching so far) have worked, volume doesn't. I have no idea what the remote code would be for a one-for-all, I don't even own a universal remote (other than my PC ;-))

Thanks again,
D

PostPosted: Tue Mar 25, 2003 2:33 am
by Guest
So am I SOL here? I'd hate to have to go back to an ir distribution setup just for one function...

PostPosted: Tue Mar 25, 2003 2:47 pm
by jrhees
drogers,

No, but you'll likely have to wait for the next USB-UIR firmware upgrade. This version (probably a couple weeks away) will take advantage of the wideband IR 'learning' receiver built into the USB-UIRT and will hopefully get a more exact copy of what your remote is sending out -- frequency and all.

I was unable to find an all-for-one code for your receiver. Are you aware if there are any matches for your receiver in the Pronto library at www.remotecentral.com ?

-Jon

PostPosted: Sun Mar 30, 2003 9:13 am
by drogers
Yeah, this one -
http://www.remotecentral.com/cgi-bin/fi ... -fr975.zip
should be it. Unfortunately I don't have a pronto and can't test it....

I can wait - I'll be in the middle of moving for the next 2 weeks anyway.

PostPosted: Sun Mar 30, 2003 10:40 pm
by jrhees
Hmmm... I wonder if there is a program available to read in the pronto .CCF file you pointed me to and display the hex of the remote codes?

-Jon
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/