by DFA » Mon Mar 08, 2004 7:06 pm
Thanks for having a closer look. Let me know what you find.
There may be cause for someone to want delay before the channel change "string" is issued. However, so far no one seems to want or need it or at least not very much delay. There are provisions in Sage to set the delay to what anyone should want or need. BUT you can't get less than about 2.5 to 2.7 secs minimum no matter how low one sets the delay (in my case, 10 ms.). That's the rub in a nutshell. There is not the full range of timing that should be there. If I set 10 ms. I would hope to get 10 ms. and if I set 2500 ms. I would expect to get 2500 ms. delay, etc.
I have filed a formal request with Sage (Jeff) as well so that he might have a look at it and see if the source of the 2.5- 2.7 sec. fixed buffering is in the Sage code.
Thanks for your time and trouble and look forward your findings. As you know, I have been posting in both the AVS and Sage forums on this topic. I have been proactive in trying to find the source and remedy for this delay.
DFA
DFA