Page 1 of 1
DirecTV D10 not changing
Posted:
Fri Aug 12, 2005 12:31 pm
by imregh
I have successfully trained the USB UIRT using BeyondTV. When I run the channel changing test, nothing happens. The red light lights up, but there is no indication the receiver is receiving anything. I have the red light pointed right at the infrared receiver. The D10 remote control does work. I have the receiver box hooked up to a regular TV as well as BeyondTV, so I can see the effect of a channel change, and the receiver does not seem to receive even a single digit. Any suggestions?
Posted:
Sat Aug 13, 2005 5:03 am
by jrhees
Please contact
support@usbuirt.com to get the lrnHelper app -- this will help you troubleshoot this issue
-Jon
D10 Problems
Posted:
Sat Aug 20, 2005 4:39 am
by tomacct
I'm having the same trouble tuning the Directv D10, did you figure out the problem using the lrnHelper app?
thanks.
D10 Problems
Posted:
Fri Sep 16, 2005 9:05 pm
by ggayowsky
I have a D10-300 bought through SnapStream. It worked first try with settings: 3 digits, 100mS space, 1 try, use Enter. Fear not.
I have the UIRT taped point blank to the front of the reciever and covered with a cloth to keep it from tuning my second box which I use for live TV.
Update: Oct 21st, 2005: DirecTV pushed an upgrade to my boxes. The hardware port (behind the black sticker) now works. As far as I can tell all D10's (100, 200, and 300's) can use the same generic serial control. You now have a choice of using either the USB-UIRT or a serial cable.
Posted:
Thu Nov 03, 2005 2:16 am
by overnow
do you know what frequency the directv remote transmits at? i tried those settings and it would not learn anything from my remote.