Is there any way to turn off the LED on the uirt?

Issues relating to installation of your USB-UIRT device.

Moderator: jrhees

Is there any way to turn off the LED on the uirt?

Postby andyd » Sat Jan 09, 2010 6:25 am

I really don't need to see the device show it has received a signal every time I've used it. Any way to disable besides putting tape over it
andyd
 
Posts: 7
Joined: Sat Jan 09, 2010 6:23 am

the led is good for testing but annoying when not

Postby brandon0413 » Tue Jan 12, 2010 8:14 pm

The easiest way I know of is to download the LrnHelper tool.
It is a little difficult to locate unless you have a direct link:
www.usbuirt.com/lrnhelper_0_0_5.zip

Using it you can access the settings for the USB-UIRT including the option to disable the red LED.

I haven't even been able to find any mention of this app on the USB-UIRT page. Kind of wierd but whatever.

You can also access these settings with the plugin for Girder, which seem difficult to locate as well (The settings in Girder that is). I'd tell you how if I could remember. Maybe if I was looking at it.
brandon0413
 
Posts: 6
Joined: Tue Jan 12, 2010 7:27 pm
Location: Austin, TX

Postby andyd » Sun Jan 17, 2010 4:27 pm

Yeah, I was sent the app through email to verify if the device was working. Noticed the settings after running it

Thanks!
andyd
 
Posts: 7
Joined: Sat Jan 09, 2010 6:23 am


Return to Installation

Who is online

Users browsing this forum: No registered users and 21 guests

cron