Hello,
I have read all the pages in this forum.
I understand I can control up to 3 zones with the USB-UIRT 2 Zones/equipment with emitters using jack located at back of USB-UIRT and 1 Device/Zone with the blaster window.
In one post I see Jon say"If you want to wire your own emitters, you can buy simple IR LED's at Radio Shack, etc. Otherwise, you can buy 'dual' emitters from places like hometech.com"
(I am not good with soldering and there are no exact laypersons guide to doing this.)
So I will buy and use dual IR Emitter. which is not that expensive so I will go this route.
Now one post I see it says you can use two indvsiual IR Emitters
Like (8170S STICK-ON IR EMITTER (SMARTHOME BRAND) or
Xantech 282M) but you will need a stereo-to-dual-mono splitter or equivalent.
My Question is which Dual Emitter route is the best? and Does it matter if you choose "Blink" Emitter or "Non-Blinking" Emitter.