new lirc supports usb-uirt

Issues relating to installation of your USB-UIRT device.

Moderator: jrhees

new lirc supports usb-uirt

Postby mrmailer » Wed Nov 29, 2006 3:38 pm

in uirt2_raw driver
http://lirc.sourceforge.net/software/sn ... e3.tar.bz2

Changes since last release:

* added support for USB-UIRT
* added transmitter support for new version of Windows Media Center
transceiver (Daniel Melander)
* added support for Iguanaworks USB IR Transceiver (Joseph Dunn)
mrmailer
 
Posts: 23
Joined: Fri Sep 29, 2006 3:30 am

Postby MM » Sat Dec 02, 2006 3:07 pm

thanks: unknown author ! :D

jrhees why don't you watch our own forum, why is there no admin ? :evil:
MM
 
Posts: 13
Joined: Sat Sep 30, 2006 6:10 pm

Postby DarwinSays » Fri Dec 08, 2006 5:53 am

w0000000t!!!1!!1oneone

this is a happy day - I've been trying to find a way to get mine working under lirc for some time now.
granted, my generally lacking linux/lirc aptitude has been the largest contributing inhibitor in regards to this endeavor, but either way...

w00t!

now me and the guys can start developing a linux release of our audit software =p

unknown author - you rock...pretty damn hard.

D.
DarwinSays
 
Posts: 2
Joined: Fri Jul 21, 2006 1:02 am

Error 'too long RAW transmission' to Dish sat receiver

Postby nemoinis » Fri Jan 12, 2007 2:42 am

Has anyone gotten this to transmit to a Dish receiver @56Khz? Here's my info:

-running Ubuntu 6.10
-lirc 0.8.1
-USB-UIRT connected to /dev/ttyUSB0
-ftdi_sio module is loaded
-lircd.conf for Dish receiver. Relevant section:

...
name dish
bits 16
flags SPACE_ENC|NO_HEAD_REP
eps 30
aeps 100

header 400 6100
one 400 1700
zero 400 2800
ptrail 400
gap 6200
min_repeat 4
toggle_bit 0
frequency 56000

begin codes
...
-receiving works, irw displays correct output

-transmitting fails. lircd outputs following:

#lircd -n /etc/lirc/lircd.conf
lircd: lircd(usb_uirt_raw) ready
\lircd: accepted new client on /dev/lircd
lircd: uirt2_raw: checksum error
lircd: uirt2_raw: UIRT version 0905 ok
lircd: uirt2_raw: UIRT version 0905
lircd: uirt2_raw: too long RAW transmission 171 > 48
lircd: uirt2_send: remote not supported
lircd: error processing command: SEND_ONCE dish up
lircd: transmission failed
lircd: removed client


Can anyone help?
nemoinis
 
Posts: 1
Joined: Fri Jan 12, 2007 2:28 am

Postby jrhees » Mon Jan 15, 2007 5:25 am

I don't know much about Lirc, but it appears that the Lirc/USB-UIRT support code is not correct on the maximum number of raw bytes allowed:

"lircd: uirt2_raw: too long RAW transmission 171 > 48"

The UIRT2 could only handle about 48 bytes, while the USB-UIRT can handle about 188.

-Jon
jrhees
Site Admin
 
Posts: 1652
Joined: Tue Jan 28, 2003 11:49 pm

Postby Maplo73 » Wed Feb 21, 2007 8:09 pm

Maplo73
 
Posts: 1
Joined: Wed Feb 21, 2007 8:06 pm


Return to Installation

Who is online

Users browsing this forum: No registered users and 18 guests

cron