ok, off this page, i got this information for lircd.conf
http://www.htpcug.com/Multi.htm
begin remote
name DISH_1
bits 16
flags SPACE_ENC|NO_HEAD_REP
eps 30
aeps 100
header 350 6000
one 324 2800
zero 324 1700
ptrail 324
gap 6000
min_repeat 2
toggle_bit 0
frequency 40000
begin codes
tv/video 0x000000000000A3FF
power 0x000000000000F7FF
menu 0x000000000000D3FF
page_up 0x000000000000C3EF
page_down 0x000000000000E3EF
guide 0x000000000000AFFF
pointer_up 0x00000000000097FF
pointer_left 0x0000000000008FFF
pointer_right 0x0000000000009FFF
pointer_down 0x00000000000087FF
select 0x000000000000BFFF
recall 0x00000000000093FF
info 0x000000000000FFFF
view 0x000000000000A7FF
cancel 0x000000000000B7FF
sys_info 0x0000000000006FFF
record 0x00000000000083FF
1 0x000000000000EFFF
2 0x000000000000EBFF
3 0x000000000000E7FF
4 0x000000000000DFFF
5 0x000000000000DBFF
6 0x000000000000D7FF
7 0x000000000000CFFF
8 0x000000000000CBFF
9 0x000000000000C7FF
0 0x000000000000BBFF
* 0x0000000000006BFF
# 0x00000000000067FF
end codes
end remote
it works now when i do
irsend SEND_ONCE DISH_1 info
works, and it pops up on my screen, but every other command seems to
not work! lircd debug says "remote not supported"
any ideas?