only two dots on irrecord with dishn-322 remote 119946

Issues relating to installation of your USB-UIRT device.

Moderator: jrhees

only two dots on irrecord with dishn-322 remote 119946

Postby mrmailer » Sat Oct 07, 2006 5:46 am

after going through instructions, i get lircd -n -d /dev/ttyUSB0 running, and then i do irrecord -l but

when it gets to where i am training it, despite led going off on usb-uirt on all buttons i hit, only two dots are appearing, not two rows!
what to do?
mrmailer
 
Posts: 23
Joined: Fri Sep 29, 2006 3:30 am

only irsend info command works

Postby mrmailer » Sat Oct 07, 2006 9:55 pm

ok, off this page, i got this information for lircd.conf
http://www.htpcug.com/Multi.htm

begin remote

name DISH_1
bits 16
flags SPACE_ENC|NO_HEAD_REP
eps 30
aeps 100

header 350 6000
one 324 2800
zero 324 1700
ptrail 324
gap 6000
min_repeat 2
toggle_bit 0
frequency 40000

begin codes
tv/video 0x000000000000A3FF
power 0x000000000000F7FF
menu 0x000000000000D3FF
page_up 0x000000000000C3EF
page_down 0x000000000000E3EF
guide 0x000000000000AFFF
pointer_up 0x00000000000097FF
pointer_left 0x0000000000008FFF
pointer_right 0x0000000000009FFF
pointer_down 0x00000000000087FF
select 0x000000000000BFFF
recall 0x00000000000093FF
info 0x000000000000FFFF
view 0x000000000000A7FF
cancel 0x000000000000B7FF
sys_info 0x0000000000006FFF
record 0x00000000000083FF
1 0x000000000000EFFF
2 0x000000000000EBFF
3 0x000000000000E7FF
4 0x000000000000DFFF
5 0x000000000000DBFF
6 0x000000000000D7FF
7 0x000000000000CFFF
8 0x000000000000CBFF
9 0x000000000000C7FF
0 0x000000000000BBFF
* 0x0000000000006BFF
# 0x00000000000067FF
end codes

end remote



it works now when i do

irsend SEND_ONCE DISH_1 info

works, and it pops up on my screen, but every other command seems to
not work! lircd debug says "remote not supported"

any ideas?
mrmailer
 
Posts: 23
Joined: Fri Sep 29, 2006 3:30 am

Postby mrmailer » Thu Oct 12, 2006 5:04 am

Ok, I tried lmhelper in XP, and....

It seems to work when I learn then transmit. i wonder if i need to
collect anything from those transmissions(i see some ir code pronto
format), but can that be used with lirc?

for instance, channel up is

0000 0048 0000 0011 0017 0164 0017 00A2 0017 00A2 0017 00A2 0017 0062
0017 00A2 0017 0062 0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A2
0017 00A2 0017 00A2 0017 00A2 0017 00A2 0017 00A1

what do i need to take from that and put in lircd.conf for up button?
thx
- Show quoted text -
mrmailer
 
Posts: 23
Joined: Fri Sep 29, 2006 3:30 am

Postby mrmailer » Wed Oct 18, 2006 3:08 am

seems as though the fix was setting min_repeat to 0 in lircd.conf
mrmailer
 
Posts: 23
Joined: Fri Sep 29, 2006 3:30 am

Postby Baldie » Tue Jun 16, 2009 12:14 pm

No one help you
you answered yourself to your post
lol
you fixed your problem or still problem
Baldie
 
Posts: 1
Joined: Tue Jun 16, 2009 11:26 am


Return to Installation

Who is online

Users browsing this forum: No registered users and 19 guests

cron